In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it http://wa.nlcs.gov.bt/?p=18444 is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Make sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are flat and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you will need to do some sanding to be certain it’s secure on your dog. You can accomplish this by sanding off any excess paper that may have been eliminated from your mask.